en10088 17122

1.4580, AISI 316Cb, UNS S31640 - stainless steel

  • 580 / X6crnimonb17-12-2, Z6cndnb17-12 DescriptionPhysical and Mechanical PropertiesHeat Treatment and WorkingWe Deliver This Steel Alloy asThe alloy is used for fasteners, heat exchangers, coolers, tanks, pumps, pipelines and similar equipment of refineries, paper mills, food processing plants and chemical plants. It is resistant to intergranular corrosion. According to PN-EN ISO 3506, 1.4580 is an A5 class stainless steel for fasteners. That means the thread smaller than 24mm in diameter has strength class of 80, and the elongation A equals 0.3 * the nominal diameter of the thread. The alloy cannot be hardened and is non-magnetic. Niobium is the sta262.1-003916-6 TAP00000TXStainless steel 1.4571/ X6CrNiMoTi 17122, cold-drawn, heat-treated to DIN EN 10216-5 Tolerances of tube outside and inside diameter according to DIN EN 10305-4/DIN2391-1-C Basic component, compression ferrule, connecting nut DS, DSW:Carbon Steel:11SMnPB30+C / 1.0718 / DIN EN 10277-3

    Attached are page(s) from the 2014 Hilti North American

    HIS-NR is manufactured from X5CrNiMo 17122 K700 stainless steel conforming to DIN EN 10088-3 with a minimum tensile strength of 101.5 ksi (700 MPa) and a minimum yield strength of 50.8 ksi (350 MPa). Adhesive Anchoring Systems HIT-RE 500 Epoxy Adhesive Anchoring System 3.2.5 Attached are page(s) from the 2014 Hilti North American HIS-RN is manufactured from X5CrNiMo 17122 K700 stainless steel conforming to DIN EN 10088-3 with a minimum tensile strength of 101.5 ksi (700 MPa) and a minimum yield strength of 50.8 ksi (350 MPa). Adhesive Anchoring Systems HIT-HY 70 Hybrid for Masonry Construction 3.2.7

    BSI Standards Publication

    Ref. No. EN 17122:2019 E National foreword This British Standard is the UK implementation of EN 17122:2019. The UK participation in its preparation was entrusted to Technical Committee CH/216, Chemical disinfectants and antiseptics. A list of organizations represented on this committee can be obtained on request to its secretary. Brass Ermeto Din Fittings, Saaral Automation ID:21426280755Standard Material Specifications Steel fittings:EO tube fittings Materials according to DIN 3859-1 Stainless steel fittings:EO tube fittings X6CrNIMoTi 17122 in accordance with DIN 17440 / EN 10088, material no. 1.4571. Brass fittings:EO tube fittings CUZN35Ni2 in accordance with

    Data sheet Shut-off valves Types SVA-DL and SVA-DH

    4 Spindle Steel X5CrNi18-10, EN10088 AISI 304 5 Cone Steel P275NL1, EN 10028-3 Grade A, A662 6 Set screw Steel Quality 8.8 Grade 5 7 Balls Stainless steel 8 Packing Gland Stainless steel X8CrNiS18-9 10088 AISI 303 9 O-ring Cloroprene (Neoprene) 10 Spring loaded Teflon ring PTFE 11 O-ring Cloroprene (Neoprene) 12 Bolts Stainless steel A2-70 Type 308 EO and EO-2 Metric E Bite Type FittingsEO tube fittings X6CrNIMoTi 17122 in accordance with DIN 17440 / EN 10088, material no. 1.4571. Brass fittings:EO tube fittings CUZN35Ni2 in accordance with DIN 17660, material no. 2.0540. Elastomer seals:NBR (BUNA-N), FKM (Fluorocarbon) Surface Finish - Steel fittings:Standard LL Series Body, Nuts, and Rings Zinc clear chromate,

    EO-2 Fitting System Introduction

    EO-2 tube ttings X6CrNIMoTi 17122 in accordance with DIN 17440 / EN 10088, material no. 1.4571. Brass ttings:EO-2 tube ttings CUZN35Ni2 in accordance with DIN 17660, material no. 2.0540. Elastomer seals:NBR (BUNA-N), FPM (Fluorocarbon) Surface Finish - Steel ttings:Standard LL Series Body, Nuts, - Zinc clear chromate, EU EN 10088-1 X5CrNiMo17122 / X 5 CrNiMo 17 12 2 This page cover the X 5 CrNiMo 17 12 2/X5CrNiMo17122 Chemical element, Mechanical Properties, X5CrNiMo17122 Datasheet, Cross Reference of X5CrNiMo17122 Mainly

    EU EN 10088-1 X6CrNiMoTi17122 / X 6 CrNiMoTi 17 12 2

    This page cover the X 6 CrNiMoTi 17 12 2/X6CrNiMoTi17122 Chemical element, Mechanical Properties, X6CrNiMoTi17122 Datasheet, Cross Reference of X6CrNiMoTi17122 Mainly used for Stainless steels. List of stainless steels. France NF EN 10088-2 X2CrNiMo17122 / X 2 CrNiMo 17 12 2 This page cover the X 2 CrNiMo 17 12 2/X2CrNiMo17122 Chemical element, Mechanical Properties, X2CrNiMo17122 Datasheet, Cross Reference of X2CrNiMo17122 Mainly used for stainless steels - part 2:technical delivery conditions for sheet/plate and strip for general purposes.

    Germany DIN EN 10088-3 X2CrNiMo17122 / X 2 CrNiMo 17

    This page cover the X 2 CrNiMo 17 12 2/X2CrNiMo17122 Chemical element, Mechanical Properties, X2CrNiMo17122 Datasheet, Cross Reference of X2CrNiMo17122 Mainly used for Stainless steels - part 3:technical delivery conditions for semi-finished products,bars,rods and sections for general purposes. PATENTOITU HELPOSTI ASENNETTAVA ESIERISTETTY austeniittistä ruostumatonta terästä standardin EN 10088-2:X2CrN|Mo 17122 and DIN 17441:1.4404 mukaisesti. Päällyste:polyolefiini-kopolymeerikalvo. Väri musta Materiaalin erityistiedot Paluuputkeen integroitu lämpötila-anturikaapeli (2 x 0,75 mm²), jossa on halogeeniton, lämpötilan vaihteluita kestävä silikonipinnoite (+180 °C).

    Parker FCG Fittings and Hoses - Hydraulic Hoses Wholesale

    Standard Material Specifications Steel fittings:EO tube fittings Materials according to DIN 3859-1 Stainless steel fittings:EO tube fittings X6CrNIMoTi 17122 in accordance with DIN 17440 / EN 10088, material no. 1.4571. Brass fittings:EO tube fittings CUZN35Ni2 in accordance with Parker FCG Fittings and Hoses - Hydraulic Hoses Wholesale Standard Material Specifications Steel fittings:EO tube fittings Materials according to DIN 3859-1 Stainless steel fittings:EO tube fittings X6CrNIMoTi 17122 in accordance with DIN 17440 / EN 10088, material no. 1.4571. Brass fittings:EO tube fittings CUZN35Ni2 in accordance with

    Parker Tube Fittings Catalog Pdf Daily Catalog

    Parker Parkrimp (crimp) series 43 fittings. Fittings wainbee See more . B-29 Hose Products Division Parker Hannifin Corporation Wickliffe, Ohio parkerhose Catalog 4400 US 43 Series Fittings Use with 301LT, 302, 304, 341,351ST, 351TC, 422, 421WC, 424, 426, 431, 436, 451TC, 451ST, 471TC, 471ST, 472TC, 482TC,482ST, 601, 881 hoses. Hydraulic Hose AA Hose B C Equipment D Product Description Feature Fastener Hilti HFX is a hybrid HIS-RN is manufactured from X5CrNiMo 17122 K700 stainless steel conforming to DIN EN 10088-3 with a minimum tensile strength of 101.5 ksi (700 MPa) and a minimum yield strength of 50.8 ksi (350 MPa). HIT-IC internally threaded insert specifications *

    STAINLESS STEEL LIST OF EQUIVALENCES

    irestal IG 01/www X 12 CrMnNIN 17-7-5 X 10 CrNi 18-8 X 8 CrNiS 18-9 X 5 CrNi 18-10 X 2 CrNi 18-9 X 2 CrNi 19-11 X 15 CrNiSi 20-12 X 12 CrNi 23-13 X 8 CrNi 25-21 SYSTEM KAN-therm InoxSystem KAN-therm Inox - technical information - 166 - - 167 - System KAN-therm Inox - fitting assembly 1 1 Pipe cutting Pipes should be cut perpendicular to their axes using pipe roll-cutter (full cut, with no breaking off nicked pipe segments).

    TERÄSPUTKI DUOSOLAR DN20 ERISTYS 14mm 10m

    Translate this pageKorrugoidut jaloteräsputket austeniittistä ruostumatonta terästä standardin EN 10088-2:X2CrN|Mo 17122 and DIN 17441:1.4404 mukaisesti. Päällyste:polyolefiini- kopolymeerikalvo. Paluuputkeen integroitu lämpötila-anturikaapeli (2 x 0,75 mm²), jossa on halogeeniton, lämpötilan vaihteluita kestävä silikonipinnoite (+180 °C). TUBO ONDULATO IN ACCIAIO INOX TUB ONDULAT (X2CrNiMo 17122 secondo EN 10088) Max pressione di esercizio:16 bar (DN 16); 10 bar (DN 20 e DN 25) Superficie per metro lineare:0 ,87 m 2 /m (DN 16); 025 2 35

    X2CrNiMo17-12-2 / 1.4404 - SteelNumber - Chemical

    Chemical composition % of steel X2CrNiMo17-12-2 (1.4404):EN 10088-2-2005 Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. X6CrNiMoTi17-12-2 / 1.4571 - SteelNumber - Chemical Chemical composition % of steel X6CrNiMoTi17-12-2 (1.4571):EN 10088-2-2005 Ti = 5 * C to 0.7 Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted.

    X6CrNiMoTi17-12-2 steel material properties,EN10088-1

    X6CrNiMoTi17-12-2 steel chemical composition and mechanical properties can be offered by BEBON steel ,we are EN10088-1 X6CrNiMoTi17-12-2 stainless suppliers,if you need X6CrNiMoTi17-12-2 steel price ,please contact us.

We are the professional supplier who can meets all kinds of steel and fabrication requirements. If your required steel parts need cutting, welding, drilling, rolling, bending, forming, grinding, stamping and so on machining, we are ready to serve you.

Comment:

Leave a comment: